Black Ball Lock Disconnect with 6.35mm Duotight

Made from highly chemical resistant materials with stainless springs and ball bearings - no cheap ABS plastics here - this baby is extremely resistant to commonly used chemicals such as phosphoric based sanitisers and caustics.

 

The incredibly small form factor allows for easy stacking of kegs. The new cap design ensures a pressure seal with just hand tightening and it can be completely taken apart for cleaning with no tools required - no need to ever have blocked poppets again when it is this easy to disassmble and clean.

 

This particular ball lock disconnect has been designed to suit 6.35mm OD EVA Tubing or 6.35mm duotight tails. Tubing can be purchased here:

6.35mm EVA Tubing - Per Meter
6.35mm EVA Tubing - 12m Roll

Some of the features include:

1. Duotight push in
   These duotight ball lock disconnects already have the duotight fitting built into the ball lock disconnect. No need for additional threaded fittings. Simply push the 6.35mm beer/gas line in.

2. Compact

   This new compact form factor is great for tight spaces or fridges where you want to pack as many kegs in as possible. This allows standard ball lock kegs to be double stacked while still connected to beer and gas lines.

3. Overmoulded Poppet

   The overmoulded poppet design means you can couple and disconnect this ball lock disconnect under extreme pressures of 150psi and will never have issues with the o-ring blowing out.

4. Tool-less Disassembly

   Other ball lock disconnects require a tool such as a flat head screw driver or spanner to take them apart for cleaning. The new caps on these allow for easy disassembly by hand, making these easier to break down for cleaning. It's literally never been easier to remove hop particles from your ball lock disconnects.

5. Extreme Chemical Resistance

   No cheap ABS plastic or nitrile seals. This ball lock disconnect is made from stainless spring and ball bearings, with an engineering polykeytone resin body, EPDM and PP/EPDM overmoulded poppet.  This makes this ball lock disconnect resistant to extreme chemicals such as phosphoric and acetic acid, caustic soda, peroxide and many other acid or base chemicals which are commonly used in homebrewing.

6. Toughness

   This ball lock disconnect is tough as nails due to the new engineering plastics incorporated into its design.

7. High Flow

   The internal design of these allows for faster flow meaning you can slightly quicker transfers when compared to other plastic ball lock disconnects.